Lathe Turret 03 Size A

409.53 (Português) + Iva

Entrega entre 1 a 2 semanas

Category:

Description

With a quick-change steel holder, various tools such as turning tools or boring bars can be fixed for quick change. The turning tool is inserted into the steel holder, secured and aligned at the correct height. The next time you insert it, the turning tool is immediately set correctly again. Using the quick change system, the tool can be positioned very quickly and easily on the workpiece.

Technical Data

  • Recommended upper slide width: 75 to 95 mm
  • Rotate diameter: 150 to 300 mm
  • Tension Swivel Steel Height: 8 to 20 mm
  • Basic body tool material: C45
  • Steel tool material holder: C45
  • surface: polished
  • Basic body hardness: 50 HRC
  • Steel Hardness Bracket: 40 HRC
  • repeatability: 0.01 mm


Time saving
Typically, multiple tools are required to machine different workpieces. The tool must always be in the correct position. The “Multifix” quick change system eliminates these annoying adjustments. The system helps you have all the turning tools ready for use at all times. Once you set the desired height for your turning tool and then you may have to readjust something else.

Our size recommendation
With us you get the quick change system in all common sizes (Aa, Ab, A, E and B). To find the correct system size for your machine, the top slide width (L) and dimension “s” (= top slide height above the center axis) are the most important specifications. Size A is recommended with a slide width of 75 to 95 mm. Compare your measurements with the details of our quick change systems. As a rule, an adjustment of the upper slide width is sufficient. In addition we have matching set sets for paulimot lathes in our assortment. Please contact us if you are unsure of the size you need due to the details of your lathe.

Determining Your System Size If you already have a Multifix system, you can quickly see its size. The name of the swap holder consists of a combination of letter numbers. The first letter of the steel bracket represents the system size (here: size A), the second for the bracket type (for example, “D” = flat lathe tool holder). The first number (eg 20) indicates the maximum turning steel height in mm. In the second number (e.g. 90), the length of the holder can be read.

Includes

1 x Basic Body
4 x AD 2090 steel bracket
1 x Bushing Wrench
1 x Square Key

Gross weight: 5.2kg